Shotblaster
| Working Width | 500 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 29.5/35.2 A |
| Motor nominal Current | 15/18.5 kW |
| Motor Rating | 25.7/31.4 A |
| Motor Rotation Speed | 2935/2940 rpm |
| Weight (kg) | 470/480 kg |
| Height (mm) | 125 cm |
| Length (mm) | 194 cm |
| Width (mm) | 64 cm |
| Dust Collector | R2D2 |
| Dust Port Diameter | 125 mm |
| Motor nominal Current (Drive Unit Motor) | 0.75 kW |
| Motor Rating (Drive Unit Motor) | 1.7 A |
| Motor Rotation Speed (Drive Unit Motor) | 2820 rpm |
- compact, maneuverable, powerful und reliable. Made for blasting middle sized or big areas. Maximum blast performance in combination with a low frame height, easy to transport, long life wear and tear parts.
Specials:
6-Blade Blast Wheels for a perfect blast pattern. (No hot spot)
Safety Break.
LED Spot Light.
Blast Wheel (large)
The Blast Wheel in combination with the Shot Cage are the main parts of the shotblaster.
Shot Cage (large)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
