Shotblaster
| Working Width | 350 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 29.5/35.2 A |
| Motor nominal Current | 15/18.5 kW |
| Motor Rating | 25.7/31.4 A |
| Motor Rotation Speed | 2935/2940 rpm |
| Weight (kg) | 440/450 kg |
| Height (mm) | 110 cm |
| Length (mm) | 185 cm |
| Width (mm) | 55 cm |
| Dust Collector | R2D2 |
| Dust Port Diameter | 125 mm |
| Motor nominal Current (Drive Unit Motor) | 0.75 kW |
| Motor Rating (Drive Unit Motor) | 1.7 A |
| Motor Rotation Speed (Drive Unit Motor) | 2820 rpm |
The new modular concept from CONTEC©
1 Height - 2 Blast widths, 2 Machines - 1 Set of spares
MODUL 350® offers the ultimate in mobile, dust free blast cleaning. It is probably the most versatile and effective surface preparation system available. The blast width of the basic MODUL 350® can be doubled by the addition of a MODUL 350 EU®( Extension Unit ) for a cost effective increase in production. The high blast performance makes the MODUL 350® ideally suited for very hard concrete, coatings and also for steel decks, bridges and tanks.
Blast Wheel (large)
The Blast Wheel in combination with the Shot Cage are the main parts of the shotblaster.
Shot Cage (large)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
MODUL 300/350 Tool Box
The most important Tools and Spare Parts for the MODUL 300 Shotblaster
