Shotblaster
| Working Width | 300 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 21.1/27.4 A |
| Motor nominal Current | 11/15 kW |
| Motor Rating | 19.4/25.7 A |
| Motor Rotation Speed | 2945/2935 rpm |
| Weight (kg) | 386/396 kg |
| Height (mm) | 100 cm |
| Length (mm) | 175 cm |
| Width (mm) | 47 cm |
| Dust Collector | TORNADO/R2D2 |
| Dust Port Diameter | 125 mm |
| Motor nominal Current (Drive Unit Motor) | 0.75 kW |
| Motor Rating (Drive Unit Motor) | 1.7 A |
| Motor Rotation Speed (Drive Unit Motor) | 2820 rpm |
The Shotblaster MODUL 300 is available with two Motor Ratings, 11 and 15 kW. The 11 kW version can be operated with the TORNADO Dust Collector.
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Shot Cage (large)
By turning the Shot Cage the blast pattern can be adjusted
Blast Wheel (large)
The Blast Wheel in combination with the Shot Cage are the main parts of the shotblaster.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
MODUL 300/350 Tool Box
The most important Tools and Spare Parts for the MODUL 300 Shotblaster