Shotblaster
| Working Width | 225 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 16 A |
| Motor nominal Current | 7.5 kW |
| Motor Rating | 14.8 A |
| Motor Rotation Speed | 2880 rpm |
| Weight (kg) | 210 kg |
| Height (mm) | 105 cm |
| Length (mm) | 148 cm |
| Width (mm) | 34 cm |
| Dust Collector | TORNADO |
| Dust Port Diameter | 70 mm |
| Motor nominal Current (Drive Unit Motor) | 0.17 kW |
| Motor Rating (Drive Unit Motor) | 1.2 A |
| Motor Rotation Speed (Drive Unit Motor) | 3000 rpm |
The new modular principle of CONTEC©
MODUL 200®XL revolutionizes dust-free, mobile shot blasting. The modular design opens up unique applications and uses. The blasting width of the basic MODUL 200®XL unit can be increased by adding the MODUL 200 EU extensions. The 200/2 and 200/3 combinations can in turn be disassembled into their basic MODUL 200®XL components and one or two MODUL 200 EU. The components can then be transported to locations previously inaccessible to conventional shotblasting machines of the same blasting power.
Blast wheel small
The blast wheel, together with the inlet bushing, is the heart of every shot peening machine.
∅160mm
Shot Cage (small)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
