Shotblaster
| Working Width | 560 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 40.5/53.1 A |
| Motor nominal Current | 2 x 11 / 2 x 15 kW |
| Motor Rating | 2 x 19.4 / 2 x 25.7 A |
| Motor Rotation Speed | 2935/2935 rpm |
| Weight (kg) | 650/690 kg |
| Height (mm) | 115 cm |
| Length (mm) | 185 cm |
| Width (mm) | 75 cm |
| Dust Collector | R2D2/R2D2-7 |
| Dust Port Diameter | 150 mm |
| Motor nominal Current (Drive Unit Motor) | 0.75 kW |
| Motor Rating (Drive Unit Motor) | 1.7 A |
| Motor Rotation Speed (Drive Unit Motor) | 2820 rpm |
The shotblaster with previously unknown performance. Compact, manoeuvrable, low height and up to 37 kW Turbine Power.
Two wear resistant blast wheels with 6 blade technology in operation. Performance options are 2 x 15 kW (30 kW) and 2 x 18.5 kW (37 kW). The ELGATOR® performs superbly in places where other machines give up. Hard topping concrete floors, Steel surfaces, Coatings - the work rate is always outstanding.
Blast Wheel (large)
The Blast Wheel in combination with the Shot Cage are the main parts of the shotblaster.
Shot Cage (large)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
ELGATOR Tool Box
The most important Tools and Spare Parts for the ELGATOR Shotblaster
