Shotblaster
| Working Width | 200 mm |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Phase | 1 |
| Current Consuption | 12 A |
| Motor nominal Current | 2 kW |
| Motor Rating | 12 A |
| Motor Rotation Speed | 2640 rpm |
| Weight (kg) | 84 kg |
| Height (mm) | 90 cm |
| Length (mm) | 115 cm |
| Width (mm) | 40 cm |
| Dust Collector | CDM 3000 |
| Dust Port Diameter | 70 mm |
For dust free preparation of areas with restricted access. The ELEPHANT®
is safe and simple to operate with lightweight and compact dimensions. It is ideal for smaller contracts which normally cannot be blasted economically. The design makes it possible to blast almost up to the wall which minimises handwork and edging - especially in the corners.
The ELEPHANT® can be supplied to operate from 230 V single phase and 400 V three phase power supplies utilising standard sockets.
The ELEPHANT® is designed to complement the established MODUL 200® and MODUL 350® and is suitable for domestic, commercial and industrial flooring contracts.
The ELEPHANT® is also available with Drive Unit.
Blast wheel small
The blast wheel, together with the inlet bushing, is the heart of every shot peening machine.
∅160mm
Shot Cage (small)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
