Shotblaster
| Working Width | 200 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 8.9 A |
| Motor nominal Current | 4 kW |
| Motor Rating | 7.7 A |
| Motor Rotation Speed | 2895 rpm |
| Weight (kg) | 120 kg |
| Height (mm) | 90 cm |
| Length (mm) | 120 cm |
| Width (mm) | 40 cm |
| Dust Collector | CDM 3000 |
| Dust Port Diameter | 70 mm |
| Motor nominal Current (Drive Unit Motor) | 0.17 kW |
| Motor Rating (Drive Unit Motor) | 1.2 A |
| Motor Rotation Speed (Drive Unit Motor) | 3000 rpm |
Shotblaster ELEPHANT-400-A with integrated Drive Unit -
Shotblasting on small and medium sized Floors.
Blast wheel small
The blast wheel, together with the inlet bushing, is the heart of every shot peening machine.
∅160mm
Shot Cage (small)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot. The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
