Floor Grinders
| Working Width | 490 mm |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Phase | 3 |
| Current Consuption | 14/16 A |
| Motor nominal Current | 6.8/8 kW |
| Motor Rating | 14/16 A |
| Motor Rotation Speed | 1440/2895 rpm |
| Weight (kg) | 187 kg |
| Height (mm) | 95-110 cm |
| Length (mm) | 109 cm |
| Width (mm) | 55 cm |
| Tool speed (rpm) | 936/1882 rpm |
| Dust Collector | CDM 3000/TORNADO |
| Dust Port Diameter | 70 mm |
The most advanced two speed grinders available. The wide range of grinding tools and operating options make the DELTA II grinders extremely versatile. They can grind most types of floors including concrete, terazzo and asphalt. The DELTA II grinders are ideal for surface preparation prior to the application of epoxy and similar coatings. They will effectively remove rubber deposits, adhesives, bituminous coatings and impacted dirt from factory floors. The DELTA II grinders are incredibly easy to operate and can be used with an industrial vacuum for a dust free working environment. Vibration and noise levels have been reduced to a minimum for the operator's safety and convenience. The unique triangular shape of the grinding tools increases the performance and the overlap created helps prevent the "rings" normally associated with twin headed grinders. With no gap between the discs it is now possible to walk forward with the machine. The finish achieved with DELTA II grinders is extremely fine and swirl free, requiring only a minimum of coating to cover.
EasyChange VS2
Attention! Not suitable for soft floor screeds or abrassive concrete surfaces!
EasyChange CA2
EasyChange F1
EasyChange PKD V
For resin and bond fillers
EasyChange PKD PR
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
DELTA II Tool Brackets
The Tool Bracket can hold max. 6 Segments Blocks. There are two versions available, round and triangle. The unique triangular version creates an overlapping of the grinding paths to prevent the 'rings' normally associated with twin headed grinders.
