Floor Grinders
Working Width | 490 mm |
---|---|
Voltage | 400 V |
Frequency | 50 Hz |
Phase | 3 |
Current Consuption | 14 A |
Motor nominal Current | 7.5 kW |
Motor Rating | 14 A |
Motor Rotation Speed | 2900 rpm |
Weight (kg) | 166 kg |
Height (mm) | 95-100 cm |
Length (mm) | 109 cm |
Width (mm) | 55 cm |
Tool speed (rpm) | 1885 rpm |
Dust Collector | CDM 3000/TORNADO |
Dust Port Diameter | 70 mm |
The DELTA II-S is the same as DELTA II but has one constant speed.
EasyChange VS2
Attention! Not suitable for soft floor screeds or abrassive concrete surfaces!
EasyChange CA2
EasyChange F1
EasyChange PKD V
For resin and bond fillers
EasyChange PKD PR
Dust Hoses
Most of the CONTEC Surface Preparation Machines can be operated dust free. To connect the machine with the Dust Collector you need a Dust Hose.
DELTA II Tool Brackets
The Tool Bracket can hold max. 6 Segments Blocks. There are two versions available, round and triangle. The unique triangular version creates an overlapping of the grinding paths to prevent the 'rings' normally associated with twin headed grinders.