User Manual

DELTA II
The most advanced two speed grinders available. The wide range of grinding tools and operating options make the DELTA II grinders extremely versatile. They can grind most types of floors including concrete, terazzo and asphalt. The DELTA II grinders are ideal for surface preparation prior to the application of epoxy and similar coatings. They will effectively remove rubber deposits, adhesives, bituminous coatings and impacted dirt from factory floors. The DELTA II grinders are incredibly easy to operate and can be used with an industrial vacuum for a dust free working environment. Vibration and noise levels have been reduced to a minimum for the operator's safety and convenience. The unique triangular shape of the grinding tools increases the performance and the overlap created helps prevent the "rings" normally associated with twin headed grinders. With no gap between the discs it is now possible to walk forward with the machine. The finish achieved with DELTA II grinders is extremely fine and swirl free, requiring only a minimum of coating to cover.
Technical Data
Download DatasheetWorking Width | 490 mm |
Voltage | 400 V |
Frequency | 50 Hz |
Phase | 3 |
Current Consumption | 14 / 16 A |
Motor Rating | 6.8 / 8 kW |
Motor nominal Current | 14 / 16 A |
Motord Rotation Speed | 1440 / 2895 rpm |
Weight | 187 kg |
Height | 95 - 110 cm |
Length | 109 cm |
Width | 55 cm |
Tool rpm | 936 / 1882 |
Recommended Dust Collector | CDM 3000 / TORNADO |
Dust Port Diameter | 70 mm |
Accessories
